DN 200 PN 40 flange: dimensions, bolt circle and drilling (EN 1092-1)
The DN 200 PN 40 flange to EN 1092-1 is 375 mm (14.76 in) across, with 12 holes of 30 mm (1.18 in) on a 320 mm (12.6 in) bolt circle, for M27 bolts; the pipe is 219.1 mm (8.63 in) outside. The holes straddle the centre lines, the first one 15° off, and the chord between neighbouring holes, which is the divider setting for stepping the drilling out, is 82.8 mm (3.26 in).
Dimensions
| Outside diameter | 375 mm (14.76 in) |
|---|---|
| Bolt circle (PCD) | 320 mm (12.6 in) |
| Number of holes | 12 |
| Hole diameter | 30 mm (1.18 in) |
| Bolts | M27 |
| Pipe outside diameter | 219.1 mm (8.63 in) |
| Angle between holes | 30° |
| First hole from the centre line | 15° |
| Chord between neighbouring holes | 82.8 mm (3.26 in) |
Draw this flange: 1:1 template and DXF
Hole coordinates
From the centre of the flange, in mm, with the first hole 15° off the horizontal axis and the others counter-clockwise, as the standards lay the drilling out.
| Hole | Angle | x (mm) | y (mm) |
|---|---|---|---|
| 1 | 15° | 154.5 | 41.4 |
| 2 | 45° | 113.1 | 113.1 |
| 3 | 75° | 41.4 | 154.5 |
| 4 | 105° | -41.4 | 154.5 |
| 5 | 135° | -113.1 | 113.1 |
| 6 | 165° | -154.5 | 41.4 |
| 7 | 195° | -154.5 | -41.4 |
| 8 | 225° | -113.1 | -113.1 |
| 9 | 255° | -41.4 | -154.5 |
| 10 | 285° | 41.4 | -154.5 |
| 11 | 315° | 113.1 | -113.1 |
| 12 | 345° | 154.5 | -41.4 |
Questions
- How many bolts does a %{size} %{class} flange have?
- %{holes}, of %{bolt}, through holes of %{hole} on a %{circle} bolt circle.
- What is the bolt circle of a %{size} %{class} flange?
- %{circle}. The holes are %{angle}° apart, and the first one sits %{half}° off the centre line, so that two flanges mate in any symmetric position. The chord between neighbouring holes is %{chord}.
- Can a %{size} %{class} flange be cut from plate?
- As a plate flange, for low pressure: ducts, tanks, water lines. The outline and the drilling above are what the flange calculator draws, with the 1:1 template and the DXF for plasma or laser. A pressure flange to %{standard} is forged, with a hub and a raised face, and its thickness and facing come from the standard.