6 inch class 150 flange: dimensions, bolt circle and drilling (ASME B16.5)
The 6 inch class 150 flange to ASME B16.5 is 11 in (279.4 mm) across, with 8 holes of 0.88 in (22.2 mm) on a 9.5 in (241.3 mm) bolt circle, for 3/4 in bolts; the pipe is 6.63 in (168.3 mm) outside. The holes straddle the centre lines, the first one 22.5° off, and the chord between neighbouring holes, which is the divider setting for stepping the drilling out, is 3.64 in (92.3 mm).
Dimensions
| Outside diameter | 11 in (279.4 mm) |
|---|---|
| Bolt circle (PCD) | 9.5 in (241.3 mm) |
| Number of holes | 8 |
| Hole diameter | 0.88 in (22.2 mm) |
| Bolts | 3/4 in |
| Pipe outside diameter | 6.63 in (168.3 mm) |
| Angle between holes | 45° |
| First hole from the centre line | 22.5° |
| Chord between neighbouring holes | 3.64 in (92.3 mm) |
Draw this flange: 1:1 template and DXF
Hole coordinates
From the centre of the flange, in mm, with the first hole 22.5° off the horizontal axis and the others counter-clockwise, as the standards lay the drilling out.
| Hole | Angle | x (mm) | y (mm) |
|---|---|---|---|
| 1 | 22.5° | 111.5 | 46.2 |
| 2 | 67.5° | 46.2 | 111.5 |
| 3 | 112.5° | -46.2 | 111.5 |
| 4 | 157.5° | -111.5 | 46.2 |
| 5 | 202.5° | -111.5 | -46.2 |
| 6 | 247.5° | -46.2 | -111.5 |
| 7 | 292.5° | 46.2 | -111.5 |
| 8 | 337.5° | 111.5 | -46.2 |
Questions
- How many bolts does a %{size} %{class} flange have?
- %{holes}, of %{bolt}, through holes of %{hole} on a %{circle} bolt circle.
- What is the bolt circle of a %{size} %{class} flange?
- %{circle}. The holes are %{angle}° apart, and the first one sits %{half}° off the centre line, so that two flanges mate in any symmetric position. The chord between neighbouring holes is %{chord}.
- Can a %{size} %{class} flange be cut from plate?
- As a plate flange, for low pressure: ducts, tanks, water lines. The outline and the drilling above are what the flange calculator draws, with the 1:1 template and the DXF for plasma or laser. A pressure flange to %{standard} is forged, with a hub and a raised face, and its thickness and facing come from the standard.